Home » Archive by category 'News'

New Bigger Lifts from Paul A Watler Machinery Movements

New Bigger Lifts from Paul A Watler Machinery Movements

Big Changes and Even Bigger Lifts for Paul A Watler (Machinery Movements). After the success of updating the smallest crane vehicle in our fleet last year; we have now updated the largest crane vehicle in our fleet.

It has come to the time where we have had to wave goodbye to our ageing Nooteboom low loader / crane trailer in favour of our latest purchase; An Andover Low Loader Trailer Paired with a Fassi F1100 XP crane. This impressive new setup affords us with the ability to lift and carry in excess of 20 Tonne.

To enable us to utilise this trailer to its fullest potential we have paired it with another new to us purchase of a Scania R420 6X2 with Rear Lift / Tag Axle. This combination gives us the potential to run special types loads (CAT 2) with gross weights of up to 60 Tonne.

For those of you reading this article and panicking; No, we haven’t sold off our Bull Nose Scania T-Cab. She is currently being rested and will be back out on the road soon….

Images

AndoverTrailerImg1

Picture 1 of 3

One year on with our DAF CF fully covered transport

After acquiring a DAF CF 18 toner, with 6 ton lifting and carrying capacity, and a full sliding canopy in August of last year, we can now report that this purchase was the perfect replacement for our aging DAF 45 210 LF 11.5 toner.

The sliding canopy affords us with a second fully covered transport vehicle and is ideal for all types of work including; local, national and international transport of machine tools.

In the past year we have undertaken many jobs with this new tool, comprising of, but not limited to; factory relocations, transport of new and old machine tools and international transport of specialist equipment.

If you would like to know more about the services we offer or would like a quote for our services with this or any other of the other vehicles in our fleet please contact us using the information on the “Contact Us” page.

New – Fully Covered Transport

Scania "Bullnose" T-Cab with Stepframe Curtainsider trailer
Our newly acquired covered Lowlaoder with double fliptoe ramps and opening roof allowing us to transport both machinery requiring lifting by large fork truck together with the advantage carrying the Fork truck whilst all kept under cover.
In addition allowing machines to be craned in through the sliding roof or running with the roof open in the case of over height Machinery.
Allowing us to now offer a fully covered transport service.

Now Insured Air Side

Volvo FM12 with Aircraft Jacks

We are now insured for work air side.

Due to equerries and continued requests to collect/uplift/work and operate air side by several airlines and associated organisations through out the uk we have instructed our insurers to extend cover to include these air side operations.

Snow is no problem to the Watlers

out in the snow, Scania T-Cab

It takes more than a bit of snow to stop us from getting the job done!

At Paul Watler ltd we are committed to our customers to move there machines whatever the weather.

New website

New website goes live! Octber 2012

At last we have managed to find time to get a new website sorted and live!

Thanks Mr Shaw!

New Scania T-CAB Added to the Fleet

Scania T-Cab
Scania ‘Bullnose’ T-cab tractor unit joins the Watler fleet.
To meet our customer’s changing needs, we’ve recently added a Scania 6×2 T-cab tractor unit to our machinery movements transport fleet. Coupled to a tri-axle ‘trombone’ low bed trailer fitted with rear-mounted  47tonne/metres PM crane, it is a great tool for industrial removals. It gets plenty of admiring glances wherever it goes.
‘Image’ is increasingly important in all aspects of industrial life, but the real news is that it gives our machinery movements team the extra muscle needed to handle the largest, most demanding roles.

“The Scania T-Cab is a real Flagship and attracts looks where ever we take it!”

International Operators License

Map
INTERNATIONAL COVERAGE
A UK Specialist with a Global Reach
The business world has an increasingly global dimension, so naturally being an organisation that serves industry and business development, the team at Watler Machinery Movements has to be prepared to meet customer demands in a changing market place.
That’s why we keep our operations staff fully up to speed with changing transport and shipping regulations, as well as the need to comply – and even exceed – Health & Safety requirements.
As these can vary in each individual national market, it’s essential that your machinery movements partner is licensed to International standards throughout Europe. Naturally, Watler Machinery Movements is.